Lowongan Kerja Migas 2014 di Qatar Petroleum; 8 positions

OPERATIONS DEPARTMENTS 1. General Operator – Condensate Primary Purpose of the job

• Monitors and carries out the operation of condensate refinery units including static and rotating equipment such as towers, vessel, reactors, furnaces, heat exchangers, pump, compressors, fin fans and water condenser, includes regular monitoring of normal operations, start-up/shutdown, various equipment/furnaces/pumps/exchangers etc. adjusting various parameters to maintain equipments in synchronization.
• Analyzed field log reading and report any anomalies observed. Assist shift Supervisor in safe, smooth and efficient functioning the plant.

Requirements

• Division : Condensate Refinery.
• Experience : 7 years of operations experience in multiple units in refinery.
• Degree : Higher Secondary Certificate (Technical HighSchool) or equivalent with 2 years technical training or equivalent.
• Special Ability :
• Good knowledge in basic arithmetic.
• Team leadership skills.
• High level concentration, anticipation, surveillance / vigilance and analysis skills.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of Condensate Distillation Unit, Naphtha Hydrotreater Unit, CCR Platforming Unit, Distillate Hydrotreating Unit, and Stabilized Condensate Unit.

2. Shift Supervisor – Condensate Primary purpose of the job

• Shift supervisor directs and controls the operations of the Condensate Refinery on 24 hrs basis (Unit - 61, 62, 63,64, 65) with an objective to strive for the highest possible production while minimizing the potential for occupational accidents.
• Assumes overall responsibility for the safe and efficient operation. Responsible for all activities of operations which includes checking of plant equipment, adjustment in operating parameters and quality control of products. Guides the team during critical activities like plant start-up, shutdown and emergencies. Coordinates and follow up on all maintenance activities.

Requirements

• Division : Condensate Refinery.
• Experience : Minimum 8 years of operations experience in refinery with 3 years of experience in supervisory level.
• Degree : Chemical engineering or equivalent.
• Special Ability : - Able to generate reports & use customized software.
• Strong Leadership, quick troubleshooting skills, sharp analytical, and computer skills.
• Ability to interact and coordinate positively within & other departments in a direct and professional manner.
• Good working knowledge of relevant process units.
• Knowledge in operation of Condensate Distillation Unit, Naphtha Hydrotreater Unit, CCR Platforming Unit, Distillate Hydrotreating Unit, and Stabilized Condensate Unit.

3. Operator 1 – Crude Primary purpose of the job

• Carries out field operation of assigned processing units in Crude Refinery including static and rotating equipment such as towers, vessels, reactors, furnaces, heat exchangers, pumps, compressors, fin fans and water condensers. Includes regular monitoring of normal operations, start-up / shutdown of various equipment / furnaces / pumps / exchangers etc, adjusting various parameters to maintain equipment / unit in synchronization. Overall custodian of his assigned unit.
• Log field readings and reports any anomalies observed to General Operator. Assist Shift Supervisor in safe, smooth and efficient functioning of the plant.

Requirements

• Division : Crude Refinery.
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical HighSchool) or equivalent with 2 years technical training or equivalent.
• Special Ability :
• Good knowledge in basic arithmetic.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of Crude Distillation, LGO Hydrotreater, Amine Treating Unit, LPG Recovery, Naphtha Hydrotreater, CCR/Platformer Unit, Fuel Gas System.

4. Field Operator 1 – Condensate Primary purpose of the job

• Carries out field operation of assigned processing units in Condensate Refinery including static and rotating equipment such as towers, vessels, reactors, furnaces, heat exchangers, pumps, compressors, fin fans and water condensers. Includes regular monitoring of normal operations, start-up / shutdown of various equipment / furnaces / pumps / exchangers etc, adjusting various parameters to maintain equipment / unit in synchronisation. Overall custodian of his assigned unit.
• Log field readings and reports any anomalies observed to General Operator. Assist Shift Supervisor in safe, smooth and efficient functioning of the plant.

Requirements

• Division : Condensate Refinery.
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical High School)
• Special Ability : - Good knowledge of basic arithmetic.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of Condensate Distillation Unit, Naphtha Hydrotreater Unit, CCR Platforming Unit, Distillate Hydrotreating Unit, and Stabilized Condensate Unit.

5. Field Operator 1 – Fluid Catalytic Cracking Primary purpose of the job

• Carries out field operation of the assigned processing units in RFCC Unit (U 41) and Power Generation Package (5105 U) under the guidance of General Operator. The job includes regular communication with the panel operator, inspecting and monitoring of various equipment, executing the start up, shutdown of rotary and static equipment, furnaces, exchangers etc., hand-over equipment for maintenance and taking over from maintenance.
• Reports to Shift Supervisor and receives instructions from Shift Supervisor during assigned shifts. Works in accordance with in established operating procedures, and work instructions. Fills log books and log sheets as per IMS procedure. Work accomplishments are subject to review and direction.

Requirements

• Division : RFCC (Residue Fluid Catalytic Cracking).
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical High School)
• Special Ability :
• Good knowledge in basic arithmetic.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of RFCC Unit, Power Co-generation ~ 15MW, Fuel Gas Treatment Unit for Environmental Protection, Heat Recovery, and Steam Boiler.

6. Field Operator 1 – Product Treatment Primary purpose of the job

• Carries out field operation of the assigned processing units in RFCC Product Treatment Units (U42, U43, U44, U45, and U46). The job includes regular communication with the panel operator, inspecting and monitoring of various equipment, executing the start up, shutdown of rotary and static equipment, furnaces, exchangers etc., hand-over equipment for maintenance and taking over from maintenance.
• Reports to Shift Supervisor and receives instructions from Shift Supervisor during assigned shifts. Works in accordance with in established operating procedures, and work instructions. Fills log books and log sheets as per IMS procedure. Work accomplishments are subject to review and direction.

Requirements

• Division : FCC (Fluid Catalytic Cracking) Complex / Product Treatment.
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical High School) or equivalent.
• Special Ability :
• Good knowledge of basic arithmetic.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of Gasoline Merox Unit, LPG Merox Unit, LPG Catalytic Polymerization Unit, Gasoline Hydrofinishing Unit, and LCO Hydrotreating Unit.

7. Operator 1 – Various Primary purpose of the job
Responsible for the field operation of Utilities ( Unit-51, Unit-52, Unit-53, Unit-22, Unit-24, Unit-54, Unit-10), including all the equipments such as Columns, vessels, reactors, heat exchangers, air and water cooler, pumps, compressors, filters and valves. Includes regular monitoring of operating conditions, start up/ shutdown, emergency handling of all the equipments in the assigned units. Adjusting various operating parameters as per the direction of Panel Operator/ Shift Supervisor. Assumes overall responsibility for the safe and efficient operation with the objective of highest possible production.
Requirements

• Division : Sulfur Complex & Utilities.
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical High School) or equivalent.
• Special Ability : - Good knowledge in basic arithmetic.
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.
• Knowledge in operation of Boiler and Feed Water Unit, Nitrogen and Air System, Cooling Water System, Waste Water Treatment Plant, Raw Water System, Fuel Gas and Hydrogen.

8. Panel Operator – Condensate Primary purpose of the job

• Responsible for control room panel operation through Distributed Control System of assigned Condensate Refinery Units during normal operation, start-up, shutdown and emergency situations. Operates and manages process parameters of number of units at the same time. Takes fast and accurate actions to keep the units under optimum conditions minimizing wastage of hydrocarbon through slopping and flaring. He is a central contact point and all communications to the field is made through him.
• Panel Operator’s role is extremely critical during emergencies (like leak / fire) whereby all announcements / information is passed by him through the radio.

Requirements

• Division : Condensate Refinery.
• Experience : 7 years of operations experience in refinery.
• Degree : Higher Secondary Certificate (Technical High School) or equivalent with 2 years technical training or equivalent.
• Special Ability :
• Good knowledge in basic arithmetic.
• Solid knowledge of DCS/Panel Operations
• Fire fighting/First Aid/BA/H2S training.
• Good working knowledge of relevant process units.

How to apply
Please kindly submit the applications in http://megarainfield.com/Vacancies
Or email to following Recruitment Consultant: Miss Nurul, nurul.hikmah@megarainfield.com
How to send the CV:

• Indicate your position that you wanted to apply in the email subject (mandatory).
• Example: Application for QP – Panel Operator Condensate
• Create a Cover Letter that explains a brief of summary why should we hire you technically (important)
• Attach your picture in the first page of your CV (mandatory)
• Latest Educational qualification certificate (mandatory)
• Experience Letter (preferred)
• All above documents prepared in one file

Only shortlisted candidate will be contacted by our recruitment team.
PT. Mega Kriya Mandiri (Megarainfield)

Read More

Lowongan Kerja Migas 2014 di Qatar Petroleum; 7 positions;

MAINTENANCE DEPARTMENTS 1. Sr. Planning Technician – Shutdown Purpose of the Job
Provides work order planning, schedules and reports plant shutdown using computerized project planning software and computerized maintenance management system (SAP) ensuring optimum usage of all resources including manpower utilization, activity duration schedule and materials/spares identification and reservation.
Requirements

• Experience : 10 years in Oil/gas/refinery or petrochemical industry with 5 years experience in the field of Shutdown Maintenance Planning.
• Degree : Completion of Secondary (12 years) education / Technical High School or equivalent.
• Special Ability : Knowledge in Computerized Maintenance Management System (SAP or similar), and Planning & Scheduling software. (Primavera and Microsoft Project)

2. Condition Monitoring Engineer Primary Purpose of the Job

• Implement reliability control system as defined by condition monitoring engineering related to condition monitoring.
• Review and conduct to the senior conditioning monitoring Engineer for the condition monitoring and reliability integrity of the refinery equipment and system.
• Collecting and complying data and reporting of the condition of rotating equipment aspects.
• Investigates condition monitoring strategy and related physical asset management on all rotating equipment and system in line with senior condition monitoring engineer perceived corporate targets.
• Implementation and recording of rotating equipment condition based maintenance.
• Implementation of system based predictive technologies relating to rotating equipment and systems.
• Measures and reports on overall rotating equipments equipment effectiveness and lube oil related cost.
• Reporting to senior conditioning engineer.

Requirements

• Experience : In excess of 10 years Mechanical Maintenance experience with major oil and gas producer with 5 years in Rotating equipment fault Condition Monitoring analysis.
• Degree : B.Sc in Mechanical Engineering or Equivalent.
• Special Ability :
• Knowledge and certification in Condition Monitoring techniques.
• Knowledge and use Condition Monitoring Engineering Software.
• Must be fit and required climbing & long exposed periods to plant.
• Knowledge in OPEX & CAPEX.

3. Planning Engineer Primary Purpose of the Job

• Produce all maintenance plans and program for maintenance activities. Includes overseeing the input of all data and the production of all shutdown planning and routine planning documentation.
• Monitor departments computerized maintenance management system s including proposing changes to enhance the system efficiency and operation, determining the overall priorities for system users and acting as prime liaison for computerized information needs between departments and IT department.
• Supervises the implementation of work control system. Control the issue of and continuously develops methods/work procedures requested to meet the dynamic changes in the departments business needs.
• Experience : Minimum 6-10 years experience in a similar capacity in the Oil / Gas / Refinery or Petrochemical Industry.
• Degree : B.Sc in Engineering (Preferably Mechanical).
• Special Ability : - 4 years experience in Computerized Maintenance Management System, (SAP / MAXIMO / EMA / TEROMAN or similar).
• Experience in working in Middle East working environment.

4. Senior Maintenance Planning Engineer Primary Purpose of the Job

• Produce all maintenance plans and program for maintenance activities. Includes overseeing the input of all data and the production of all shutdown planning and routine planning documentation.
• Monitor departments computerized maintenance management system s including proposing changes to enhance the system efficiency and operation, determining the overall priorities for system users and acting as prime liaison for computerized information needs between departments and IT department.
• Supervises the implementation of work control system. Control the issue of and continuously develops methods/work procedures requested to meet the dynamic changes in the departments business needs.

Requirements

• Experience : Minimum 12 years experience in a similar capacity in the Oil / Gas / Refinery or Petrochemical Industry.
• Degree : B.Sc in Engineering (Preferably Mechanical).
• Special Ability : - 4 years experience in Computerized Maintenance Management System, (SAP / MAXIMO / EMA / TEROMAN or similar).
• Experience in working in Middle East working environment.

5. General Technician – Fittings Primary Purpose of the Job
Carries out or assist in the maintenance and repair of rotating and stationary equipment which includes small pumps, compressors, vessels, columns, furnace, heat exchangers, etc. Also does preventive maintenance and monitoring and repair of old and new machinery in the Refinery.
Requirements

• Experience : Minimum 8 years experience in a similar capacity in the Oil / Gas / Refinery or Petrochemical Industry.
• Degree : Diploma in Mechanical Engineering or equivalent
• Special Ability : Have skill in maintenance and repair of various types of stationary equipment like boilers, heat exchangers, water treatment plant, marine/crude loading arm, piping system, all types of valves except control valves, fire fighting systems, heaters, vessels, columns, reactors furnaces in the refinery, berth 6.

6. Senior Technician – Mechanical Primary Purpose of the Job:
Carries out high skilled maintenance, repair and overhaul of stationary and rotary equipment like pumps, compressor, steam/gas turbines, turbo machinery, furnace, heater, columns, vessel, heat exchangers, etc. in the refineries 1 & 2, RFCC, condensate refinery, utilities, tank farm & berth #6, also carries out disassembly/assembly Dan repair of defective equipment and installation/testing of new machinery. Carries out independently major jobs with minimum guidance from Engineers.
Requirements

• Experience : Minimum 12 years experience in a similar capacity in the Oil / Gas / Refinery or Petrochemical Industry and must have experience in Steam / gas turbines & Turbo machinery.
• Degree : Diploma in Mechanical Engineering or equivalent
• Special Ability : Knowledge of mechanical equipment Rotary / Stationary. Carries out high skilled maintenance, repair and overhauls stationary and rotary equipment like pumps, compressors, steam/gas turbines, turbo machineray, furnace. Heaters, columns, vessels, heat exchangers, etc.

7. Technician I – Mechanical Primary Purpose of the Job
Carries out or assist in the maintenance and repair of rotating and stationary equipment which includes small pumps, compressors, vessels, columns, furnace, heat exchangers, etc. Also does preventive maintenance and monitoring and repair of old and new machinery in the Refinery.
Requirements

• Experience : 5 years experience in maintenance & repair Oil/Refinery/Petrochemical Industry.
• Degree : Industrial school certificate with 2 years technical training or its equivalent
• Special Ability : Carries out or assists in the maintenance and repair of stationary and rotary equipment which include small pumps, compressors, vessels, columns, furnace, heat exchangers, etc.

How to apply
Please kindly submit the applications in http://megarainfield.com/Vacancies
Or email to following Recruitment Consultant: Miss Nurul, nurul.hikmah@megarainfield.com
How to send the CV:

• Indicate your position that you wanted to apply in the email subject (mandatory).
• Example: Application for QP – Panel Operator Condensate
• Create a Cover Letter that explains a brief of summary why should we hire you technically (important)
• Attach your picture in the first page of your CV (mandatory)
• Latest Educational qualification certificate (mandatory)
• Experience Letter (preferred)
• All above documents prepared in one file

Only shortlisted candidate will be contacted by our recruitment team.
PT. Mega Kriya Mandiri (Megarainfield)

Read More

Lowongan Kerja Migas Terbaru 2014 diRekindWorleyParsons

RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri and PT. WorleyParsons Indonesia and is currently providing Engineering and Construction Management services for PT. Chevron Pasific Indonesia in Duri, Riau under its Engineering and Construction Management Contract. We are seeking qualified and highly motivated engineers from multiple disciplines to join and experienced team in a fast paced environment.
1. LEAD PROCESS ENGINEER
Work Location: Jakarta Responsibilites
• Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
• Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary
• Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services
• Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period.
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
o Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
o Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
o Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
• The candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.
2. SENIOR PROCESS ENGINEER
Work Location: Jakarta Roles and Responsibilities
• Prepare and complete process engineering design, coordinate Contractors activities in development of process engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required to support Companys related projects
• Work closely with Companys user(s) during review sessions of deliverables
• Provide mentoring on related process engineering aspects to Contractors Process Engineers to enhance their competency to provide risk management (safety and reliability) services to the various RekindWorleyParsons Safety & Risk Management clients.
• To be responsible to the performance of projects assigned to both in terms of technical capability and also commercial performance of the project.
• To promote RekindWorleyParsons Safety & Risk Management to clients to achieve follow-on work with existing clients and new work with prospective clients.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• Address and co-ordinate safety in Design Requirements.
• Perform Inherent Safety Review.
• Knowledge of HAZOP workshops, Fire & Explosion Analysis, Fire Protection related studies and Formal Safety assessments.
• Identify Safety Critical Element & Performance Standards.
• Identify Design Requirements for Safety Systems.
• Perform Risk Assessment Studies including QRA, FERA, ESSA, F&G, Dropped Object,
• Perform Loss Prevention Studies includes Hazardous Area Classification, EERA.
• Perform fire water system design including fire water demand calculations and steady-state fire water network hydraulic modelling
• Have a sound understanding of Active and Passive Fire Protection Design
• Estimation of work scopes & CTR.
• The candidate shall have thorough knowledge on process engineering and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• The candidate shall have high mentoring & coaching skills.
3. SENIOR DESIGN ENGINEER PIPING
Work Location: Jakarta Responsibilites:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
The candidate shall have high mentoring & coaching skills.
4. SENIOR DESIGN ENGINEER MECHANICAL
Work Location: Jakarta Responsibilites:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API610, API676, ASME-VIII Division 1/2, API650, etc.
• The candidate shall have high mentoring & coaching skills.
5. PROJECT CONTROLS SPECIALIST - PLANNER
Work Location: Jakarta Roles and Responsibilities
• Coordinate and execute project controls Services for Companys projects both at individual or portfolio level which shall include but not limited to:
• Working with Contractors Scheduler to develop and update master schedule (resources loaded, WBS based), resources planning / prioritization / leveling, etc.
• Working with Contractors Cost Engineer to perform cost control & forecasting.
• Coordinate with Companys contractor to ensure timely submission of weekly report including review its accuracy.
• Work closely with Company and Companys contractors during performance of project controls services for Companys projects.
• Develop and maintain Contractors processes and procedures related with project controls.
• Perform project scheduling Services for Companys projects both at individual or portfolio level which shall include but not limited to: development & update of project schedule (up to levei-4), collaboration with Contractors Project Controls Specialist to develop and update master schedule (resources loaded, WBS based), critical path identification in project schedule, etc.
• Work closely with Company and Companys contractors during performance of project scheduling services for Companys projects.
• Develop and maintain Contractors processes and procedures related with project scheduling.
• Prepare detailed schedule for project execution covering all associated activities (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, etc.), interconnection among activities and determining critical path activities, by referring to historical data and/or appropriate duration benchmarks and/or professional judgment
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 10 years working experience in engineering, construction and project controls, with minimum 5 years of which are for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have thorough knowledge on various project controls practices and related codes & standards, including associated software.
• The candidate shall have broad knowledge on project scheduling techniques and various cost estimating methods for engineering and construction works.
• The candidate shall have high skill for facilitation & coordination, and networking.
6. PROJECT CONTROLS SPECIALIST – COST ESTIMATOR
Work Location: Jakarta Roles and Responsibilities
• Coordinate and execute project controls Services for Companys projects both at individual or portfolio level which shall include but not limited to:
• Working with Contractors Scheduler to develop and update master schedule (resources loaded, WBS based), resources planning / prioritization / leveling, etc.
• Coordinate with Companys contractor to ensure timely submission of weekly report including review its accuracy.
• Work closely with Company and Companys contractors during performance of project controls services for Companys projects.
• Develop and maintain Contractors processes and procedures related with project controls.
• Perform cost estimating & control Services for Companys projects both at individual or portfolio level which shall include but not limited to: cost estimating, cost control & forecasting, etc.
• Prepare construction cost monitoring report for project executed by Companys contractors and supervised by Contractor. This include in providing monthly project cost accrual for Companys contractor and Contractor.
• Work closely with Company and Companys contractors during performance of cost estimating & control services for Companys projects.
• Working with Contractors Cost Engineer to perform cost control & forecasting
• Develop and maintain Contractors processes and procedures related with cost estimating & control.
• Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 10 years working experience in engineering, construction and project controls, with minimum 5 years of which are for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have thorough knowledge on various project controls practices and related codes & standards, including associated software.
• The candidate shall have broad knowledge on project scheduling techniques and various cost estimating methods for engineering and construction works.
• The candidate shall have high skill for facilitation & coordination, and networking.
7. DESIGN ENGINEER ELECTRICAL
Work Location: Jakarta Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.
8. DESIGN ENGINEER PIPING
Work Location: Jakarta Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software (refer to Attachment A5) and codes/standards.
9. DESIGN ENGINEER INSTRUMENTATION & CONTROL
Work Location: Jakarta Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
10. DESIGNER INSTRUMENT AND CONTROLS
Work Location: Jakarta Roles and Responsibilities
• Discuss with Contractors Senior Engineer and/or Design Engineer with respective discipline, to determine number of drawings required for each specific project/work and to define function & objective of each drawing.
• Plan and prepare design sketches of Facility design in accordance with its function and objective as basis for development of design drawings.
• Direct and guide Senior Drafter and/or Drafter in development of design drawings with CADD.
• Conduct field data collection and verification to ensure drawings accuracy and completeness.
Qualification of Personnel
• Minimum education is to possess an engineering diploma degree (D3) with 8 years working experience or senior high school graduate (SMU) with 12 years working experience, both in design drafting by using CADD.
• Minimum 6 years of which (with D3 degree) or 9 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be familiar with design practices and engineering codes & standards in respective discipline.
• The candidate shall be fully conversant with CADD baseline software: Intergraph Microstation version 8i.
All applications are appreciated and will be treated confidentially. Only qualified, short-listed applicants will be invited for further process. If you find that your skill meet the requirement please send your resume in PDF to lica.rizawaty@rekindworleyparsons.com, & ayu.anindita@rekindworleyparsons.com with the title of applied position as email subject. Please dont attach other document besides your own resume

Read More

Lowongan Kerja Migas (power) 2014 di MAN

V A C A N C Y We are the subsidiary of a worldwide leading diesel engine and turbomachinery manufacturer, based in Jakarta, due to the business expansion, looking for young, dynamic, enthusiastic and qualified persons for the following positions:
Commissioning Engineer (code: CE) • Graduated from reputable university majoring in Instrumentation/Electrical or other engineering field
• At least 5 years proven experience in pre-commissioning and commissioning of steam turbine or centrifugal compressor or gas turbine or engine
• Ability to do PLC programming is definitely an advantage
General requirements:
• Age max 30 years
• English fluency both oral and written.
• Willing to travel
• Computer literacy in Microsoft Office (Word, Excel. Power Point, Project)
• Able to read and well understand the instrumentation loop diagram, Process Flow Diagram (PFD), Piping & Instrument Diagram (P&ID), instrument data sheet, logic diagram
• Strong analytical, logical problem solving ability and has good attitude for technical field work
SALES ENGINEER (code: DS) • Graduated from reputable university majoring in Mechanical or other engineering fields.
• At least 5 years proven experience in sales of steam turbines, gas turbines or gas/diesel engine especially in Refinery, LNG industry, fertilizer industry, air separation plant (basic industry) and or petrochemical industry sectors. Other sales track record in engineered equipment / package / pumps is also welcome to apply.
• Having a good network in Refinery, LNG industry, fertilizer industry, air separation plant (basic industry) and or petrochemical industry sectors
General requirements:
• Age max 35 years
• English fluency both oral and written.
• Willing to travel
• Computer literacy in Microsoft Office (Word, Excel. Power Point, Project)
SENIOR (STEAM TURBINE) SALES ENGINEER (code: SSE) • Graduated from reputable university majoring in Mechanical or other engineering fields
• At least 10 years proven experience in sales of steam turbines, gas turbines, boilers, pumps or other engineered equipment in power plant sector.
• Experience and having good contact and sales record in in selection and specification of rotating machinery field and its auxiliaries, will be a valuable advantage
• Exposure and having good contacts and sales record in Pulp & Paper industries, Petrochemical industries and/or Industrial Power Generation Sectors are advantage.
General requirements:
• Age max 40 years
• English fluency both oral and written.
• Willing to travel
• Computer literacy in Microsoft Office (Word, Excel. Power Point, Project)

Please mention the position code in your application and email your brief CV, recent photograph, academic transcript and expected salary to Made.Aryawan@id.man.eu. Extensive overseas training will be offered to successful candidates

Read More

Lowongan Kerja Migas 2014 di PT. TIMAS SUPLINDO (Timas)

PT. TIMAS SUPLINDO (Timas) – is Engineering, Procurement, Construction and Installation (EPCI) company which has attained ISO 9001:2008 Quality Management System Certification, for the scope of Detailed Engineering, Procurement, Construction, Testing, Commissioning and Project Management.
PT. TIMAS SUPLINDO established since 1992 with supported professional experts and able resources. Our existence and achievement over the past 20 years has enriched us with the experience, knowledge, and the capability to overcome any challenge, obstacles and barriers in many EPCI oil and gas (offshore and onshore) projects.
We are urgently looking for highly qualified, talented, dynamic, productive and independent personnel to fill in the challenging position:
OFFSHORE DIVISION
1. Instrument & Control Engineer
2. Telecommunication Engineer
3. Senior Electrical Engineer
4. Electrical Engineer
5. Instrument precom-comm lead engineer
6. Instrument precom-comm engineer
7. Electrical precom-comm engineer
8. Electrical precom-comm lead engineer
9. Mechanical precom-comm lead engineer
10. Precom Administrator/Dossier
General Qualification:
- Has at least 5+ to 15+ years sufficient experience in relevant position in oil and gas industry, offshore project experience is preferable
- Has a good communication skill
- Fluent in English (both verbal and written)
- Able to work with a dynamic and multi-cultural work environment

Please submit your application not more than 28 September 2014 with updated CV, certificates, expected salary. Write your name and the job title applied in email subject line to: recruitment.offshore@timas.com Only shortlisted candidates will be notified.
For further information, please visit our website at www.timas.com

Read More

Lowongan Kerja Migas 2014 di PT Perwita Nusaraya;

Our Reputable Client, Al Khafji Joint Operations (KJO) in KSA, a Joint Petroleum Production Operations between Aramco Gulf Operations Company (AGOC) KSA and Kuwait Gulf Oil Company (KGOC) Kuwait is looking for highly personnel from Indonesia to fill the following positions below:
1. MATERIAL ENGINEER (Planning and Business Support) To provide technical assistance and advice to the Superintendent on issues regarding material management and long term planning to ensure that issues and problems in the division is addressed and resolved in order to relieve pressure on peers and letting them focus more on their respective areas.
Qualifications :
Academic and professional qualifications:
Bachelor degree in Industrial Engineering or other Engineering fields
Experience:
Minimum 4 years of experience
Languages:
Minimum English language required is KJO L4 – Intermediate
2. CONTRACTS CONTROLLER To provide administrative support for the planning, tendering, and contracting processes to ensure the smooth function of the Contracts Department.
Qualifications :
Academic and professional qualifications:
Bachelor degree in Business Administration or Engineering or Law
Experience:
Minimum 4 years of experience preferably in upstream oil and gas industry
Languages:
Minimum English language required is KJO L6 – Advanced
3. CONTROLLER, DRILLING & WORKOVER BUDGET To coordinate and monitor the Drilling & Workover annual Operating/Capital Budgets, Five Year Business Plan and progress on Key Performance Indicators to provide timely and accurate information on Drilling & Workover operations financial performance for management decision making while preparing Authorization for Expenditure (AFE), monthly activity report and monthly accruals adhering to KJO standards and procedures.
Qualifications :
Academic and professional qualifications:
Bachelor degree in Accounting, Finance or Engineering.
Experience:
Minimum 4 years of experience with at least 2 years in Drilling & Workover or exploration operations
Languages:
Minimum English language required is KJO L4 – Intermediate
4. PETROLEUM ENGINEER To coordinate with various Exploration & Production data owners to collate E&P data and conduct quality assurance & checks before accurately uploading it to the Corporate Database ensuring that databases are periodically updated and stay current with activities in EDD in compliance to set policies, procedures and standards.
Qualifications :
Academic and professional qualifications:
Bachelor degree in Petroleum engineering
Experience:
Minimum 4 years of experience in coordinating various Exploration & Production data
Languages:
Minimum English language required is KJO L4 – Intermediate
5. DRILLING RIG SUPERVISOR (Onshore / Offshore) To monitor, control, and support drilling and workover operations on a 24 hours a day basis based on directing and monitoring contractors activities at assigned rigs ensuring optimization of operational processes whilst controlling drilling materials and supplies in compliance with set policy, procedures and standards.
Qualifications :
Academic and professional qualifications:
Bachelor degree in Petroleum Engineering, Or Technical diploma in related petroleum engineering field
Experience:
Bachelor: Minimum 8 years of experience with 4 years in a supervisory position in directing and monitoring contractors activities, Or Diploma: minimum 14 years of experience in drilling rig operations in directing and monitoring contractors activities
Languages:
Minimum English language required is KJO L5 – Upper-Intermediate
6. LOGISTIC COORDINATOR To plan and manage the day to day logistics with Drilling Operations Supervisor and Drilling Contractors and Service Companies including ordering and manifesting personnel and material.
Qualifications :
Academic and professional qualifications:
Degree in Logistics or Business Administration
Experience:
Minimum 4 years of experience in logistics for drilling operations
Languages:
Minimum English language required is KJO L4 – Intermediate

Please send your detail resume in WORD FILE ONLY and put the tittle of position applied and code (KJO) in the email subject (i.e : Petroleum Engineer – KJO) to : oilgas@perwitanusaraya.co.id PT. Perwita Nusaraya
Graha Perwita Building
Jl. Raya By Pass Km 31 Krian, Sidoarjo
P : +6231.8988379 | F : +6231.8988309
www.perwitanusaraya.co.id

Read More

Lowongan migas di Kelly Engineering Resources

Kelly Engineering Resources, a specialty service of Kelly Services®, is focused exclusively on placing skilled engineering professionals in contract, contract-to-hire, and full-time engineering jobs across a full spectrum of related industries and disciplines. We are specialized to support our best clients in Oil & Gas, EPCI, Infrastructure and Mining industries.
Currently their urgently required:
Project Manager
Construction Manager
Commissioning Manager
Senior Process Safety/Technical Safety/Loss Prevention Engineer
Senior Process Engineer
Senior Piping Engineer
Senior Mechanical Engineer
Senior Instrument Engineer
Senior Electrical Engineer
Senior Civil Engineer
Requirements:
- Minimum 8 years extensive experiences in similar role handled Offshore/Onshore /Power Plant/Energy Rental (Caterpillar)/Infrastructure project
- Excellent leadership and able to interface effectively with all levels in a cross functions organization
- Willing to travelling and ready to be assigned on project site
- Fluent English in written and oral communication
- Available to join immediately
Kindly send your comprehensive CV and put position title as the email subject to:
KER-recruitment@kellyservices.co.id
Only shortlisted candidates will be notified.
Kelly Services, Inc. (NASDAQ: KELYA, KELYB) is a leader in providing workforce solutions. Kelly® offers a comprehensive array of outsourcing and consulting services as well as world-class staffing on a temporary, temporary-to-hire, and direct-hire basis. Serving clients around the globe, Kelly provided employment to approximately 440,000 employees in 2013. Visit kellyservices.com and download The Talent Project, a free iPad® app by Kelly Services.

Read More

Lowongan Kerja Migas 2014 di PT Synergy Engineering

URGENTLY REQUIRED PT Synergy Engineering being the fastest growing Engineering & Consultant company in the South East Asian Region, specifically in Indonesia, invites Indonesian’s professionals to join our team. Our client list covers almost all major oil & gas company in Indonesia and in the region. We’re expanding our team to meet the current and upcoming projects and in needs for the positions below :
C. ENGINEERING
8. ADMINISTRATION DEPARTEMENT
1. HR STAFF
Job Responsibility :
To assume responsibility for assist Admin Manager for the company’s compliance with goverment regulation, legal matters, policies and procedures within the company in relation to personnel matter. And responsibility for assist Admin Manager of Recruitment Process, Training and development and personnel administration.
Job Qualification :
• Bachelor Degree from Psychology/Management/Law Major with minimum 1 year experience in HR area.
• Max. 27 years old
• Must possess general understanding, knowledge and experience in HR field such as recruitment; training; compensation, organizational development and personnel data management.
• Strong knowledge and experience in industrial relation matter as well the application of Manpower Regulation is more preferable.
• A team worker and possess strong analytical mind
2. ACCOUNTING AND FINANCE
Job Responsibility :
• Checking the progress of client payment, and follow up any outstanding account receivables
• Making Daily Transactions include :
a) AP & AR Processing/Records
b) Journalized
• Maintain filling system of related documents
Job Qualification :
• Candidate must possess at Bachelor Accountancy from reputable University
• Fresh Graduate are encourage to apply
• Experience on accounting and tax would be an advantage
• Minimum training required : Zahir, Brevet A & B
• Must Possess Analytical skills
• Age between 22 - 27 years old
3. RECEPSIONIST AND ADMINISTRATION
Job Responsibility :
• Filiing and maintain records
Job Qualification :
• Fresh Graduate/Entry level applicants are encourage to apply
• Have good personality, apperance, attitude, honest, responsible and willing to work flexible hours
• Excellent communication and interpersonal skill
• Preferable domicile in Tangerang
9. IT DEPARTMENT
1. IT HELPDESK
Job Responsibility :
• First Level Support
• Trobleshoot Software, Hardware, Network
• Maintain system and documentation
Job Qualification :
• Min. bachelor degree in Informatics Engineering, Computer Science

• Have experience basic troubleshot hardware and sotware
• Have basic network knowledge
• Min. experience 1 year in the same position
2. IT Programmer
Job Responsibility :
• Confirms project requirements by reviewing program objective, input data, and output requirements with analyst, supervisor, and client.
• Programs the computer by entering coded information.
• Installs, customizes and maintains operating systems software including installing and testing new releases
Job Qualification :
• Bachelor degree in Informatics Engineering, Computer Science
• Min. 2 yrs working as software engineer/programmer.
• Have experience in using Nodejs.
• Have experience in using Nginx.
• Have experience working with NoSQL databases (mongodb, couchdb, neo4j, etc.).
• Knowledgeable in object oriented programming paradigm and design patterns is a must.
• Used to work using Git VCS is a must.
• Knowledgeable of well-known technology standards (RFC, W3C, IEEEetc.) will be advantageous.
GENERAL REQUIREMENT:
• Good verbal and written communication skills in the English language
• Good interpersonal skills, with the ability to forge productive working relationships with all personnel
• Personal motivation and self-learning ability
• Ability to cope in a positive and productive manner within a high-pressure environment, while handling a large amount of detail as expected in large Projects with aggressive schedules
• Able to work on own initiative and within a team

Please send your application (CV, Certificate & Transcript) to recruitment@ptsynergy.co.id and put job title name on subject email

Read More

Lowongan Kerja Migas 2014 di PT. TIMAS SUPLINDO (Timas)

PT. TIMAS SUPLINDO (Timas) is an Engineering and Construction company which has attained ISO 9001:2008 Quality Management System Certification, for the scope of Detailed Engineering, Procurement, Construction, Testing, Commissioning and Project Management.

PT. TIMAS SUPLINDO established since 1992 with supported professional experts and able resources. Our existence and achievement over the past 20 years has enriched us with the experience, knowledge, and the capability to overcome any challenge, obstacles and barriers in many EPC oil and gas (offshore and onshore) projects.

We are urgently looking for highly qualified, talented, dynamic, productive and independent personnel to fill in the challenging position:

Position:

Civil Engineer for Project

Minimum Requirement:

• Male, max. 40 years old
• Bachelor Degree in Civil Engineer
• Min. 5 years of working experience in the same position in Oil & Gas Industry
• Having experience in preparing the technical & commercial proposals
• Good in Auto CAD
• Having minimum handle 2 projects
• Having experience in Geotechnical
• Having Experience in Design
• Familiar with SAP 2000 will be advantage
If you are confident that you meet our requirements, please submit your application up to 2 weeks with complete CV, certificates, expected salary and indicating the job position by e-mail, to:
recruitment.onshore@timas.com
Please visit our website at www.timas.com

Read More

Lowongan Kerja Migas 2014 di PT. TIMAS SUPLINDO (Timas)

PT. TIMAS SUPLINDO (Timas) – is Engineering, Procurement, Construction and Installation (EPCI) company which has attained ISO 9001:2008 Quality Management System Certification, for the scope of Detailed Engineering, Procurement, Construction, Testing, Commissioning and Project Management.
PT. TIMAS SUPLINDO established since 1992 with supported professional experts and able resources. Our existence and achievement over the past 20 years has enriched us with the experience, knowledge, and the capability to overcome any challenge, obstacles and barriers in many EPCI oil and gas (offshore and onshore) projects.
We are urgently looking for highly qualified, talented, dynamic, productive and independent personnel to fill in the challenging position:
OFFSHORE DIVISION
1. Project Secretary (Domicile in Balikpapan only)
2. Document Control (Domicile in Balikpapan only)
General Qualification:
- Has at least 5 years sufficient experience in relevant position in oil and gas industry:
- Has a good communication skill
- Fluent in English (both verbal and written)
- Able to work with a dynamic and multi-cultural work environment
Please submit your application not more than 21 September 2014 with updated CV, certificates, expected salary. Write your name and the job title applied in email subject line to: recruitment.offshore@timas.com
Only shortlisted candidates will be notified.
For further information, please visit our website at www.timas.com

Read More

Lowongan Kerja Migas 2014 di Pertamina

PT Pertamina (Persero); 10 posisi
Posting date: September 17, 2014 Expiry date: October 01, 2014


Bimbingan Praktis Ahli (BPA-D4) - DKI Jakarta - 2014 Batch II ( BPAER2DK14 )
PT Pertamina (Persero)
Region : Jawa Bagian Barat (Jakarta)
Location Test : Jakarta

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Jatim & Balinus - 2014 Batch II (BPAER2JB14)
PT Pertamina (Persero)
Region : Jawa Timur-Bali-Nusa Tenggara
Location Test : Surabaya

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Jawa Bagian Barat - 2014 Batch II ( BPAER2JB14 )
PT Pertamina (Persero)
Region : Jawa Bagian Barat (Jakarta)
Location Test : Bandung

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Jawa Bagian Tengah - 2014 Batch II ( BPAER2JT14 )
PT Pertamina (Persero)
Region : Jawa Bagian Tengah (Semarang)
Location Test : Semarang

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Jayapura - 2014 Batch II ( BPAER2JP14 )
PT Pertamina (Persero)
Region : Maluku Papua
Location Test : Jayapura

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Kalimantan - 2014 Batch II (BPAER2KM14)
PT Pertamina (Persero)
Region : Kalimantan
Location Test : Balikpapan

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Sulawesi - 2014 Batch II (BPAER2SW14)
PT Pertamina (Persero)
Region : Sulawesi
Location Test : Makassar

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Sumatera Bagian Selatan - 2014 Batch II (BPAER2SS14)
PT Pertamina (Persero)
Region : Sumatera Bagian Selatan (Palembang)
Location Test : Palembang

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Praktis Ahli (BPA-D4) - Sumatera Bagian Utara - 2014 Batch II ( BPAER2SU14 )
PT Pertamina (Persero)
Region : Sumatera Bagian Utara (Medan)
Location Test : Medan

Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Praktis Ahli (BPA) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (Program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
1. IPK Min 2.75
2. Berijazah D4 (Jurusan Berakreditasi Min B)
3. Untuk D4, usia Max 26 Tahun Pada Tahun 2014
4. Sehat Jasmani & Rohani
5. Min English Score dari Lembaga Terpercaya TOEFL: PBT (350) / IBT (30) / IELTS 4.5 / TOEIC 400
6. Salinan Surat Bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
7. Salinan SKCK (Surat Keterangan Catatan Kepolisian)
8. Aktif Berorganisasi dan Bersedia Ditempatkan di Seluruh Wilayah Operasi PT. Pertamina (Persero)

Bimbingan Profesi Sarjana (BPS-S1) 2014 Batch II ( BPSRECII14 )
PT Pertamina (Persero)
Job Description
- Mengikuti program pendidikan yang komprehensif di dalam Bimbingan Profesi Sarjana (BPS) dimana akan terdapat kombinasi pendidikan dalam kelas & OJT (program On Job Training)
- Mempelajari dimana kegiatan proses bisnis perusahaan secara menyeluruh, melakukan observasi dan analisa terhadap kondisi lapangan

Job Requirement
- Berijazah S1
- IPK min 3.0 dari skala 4
- Berijazah S1/Surat Keterangan Lulus S1 dari perguruan tinggi berakreditasi (min B)
- Usia Max. 27 tahun pada tahun 2014
- Sehat Jasmani & Rohani
- English Score dari Lembaga Terpercaya TOEFL: PBT (450)/ IBT (45) /IELTS 5.5 /TOEIC 550
- Salinan Surat bebas NAPZA (Narkotika, Psikotropika dan Zat Adiktif)
- Salinan SKCK
- Aktif berorganisasi & Bersedia ditempatkan di seluruh wilayah operasi PT. PERTAMINA (PERSERO)

Please submit your application letter and resume to our official website : http://recruitment.pertamina.com

PT PERTAMINA (PERSERO) sama sekali tidak memungut biaya apapun dalam proses rekrutmen ini. Apabila ada oknum yang mengatasnamakan Pertamina dan menjanjikan sesuatu dengan imbalan tertentu, harap melaporkan kepada Contact Pertamina di telepon 500-000 atau email: pcc@pertamina.com

Read More