|
RekindWorleyParsons is a Joint Operation between PT. Rekayasa Industri
and PT. WorleyParsons Indonesia and is currently providing Engineering
and Construction Management services for PT. Chevron Pasific Indonesia
in Duri, Riau under its Engineering and Construction Management
Contract. We are seeking qualified and highly motivated engineers from
multiple disciplines to join and experienced team in a fast paced
environment.
1. LEAD PROCESS ENGINEER
Work Location: Jakarta
Responsibilites
• Lead and supervise Contractors activities in
development of deliverables in process engineering discipline during
Contract period.
• Serve as SME (subject matter expert) in process
engineering discipline during Contract period, including utilizing
Contractors corporate internal and/or external professional networking
as necessary
• Implement QA/QC plan including internal squad check
process for process discipline deliverables, prior to submission to
Company
• Interface with relevant professional organizations to get
information on “state of the art” technologies/knowledge on process
engineering discipline during performance of Engineering Services
•
Report to and assist Superintendent Engineering for execution of
Off-site and On-site Engineering Services during the Contract period.
Requirements
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in
process engineering discipline works for oil & gas or petrochemical
handling projects and/or facilities, with 10 years of which at senior
dan lead position. Furthermore, several years of which shall cover
following aspects:
o Minimum experience as Lead Process Engineer
for EPC or ECM or EB contracts for oil & gas or petrochemical
industries in the last 5 years.
o Minimum 5 years working
experience outside of his/her home country, in supervising a group of
process engineering discipline personnel from various levels (e.g.
senior design engineers, design engineers, 3D designers, designers,
drafters, etc.) with diverse nationalities.
o Alternative for
Article (b) above for Group III National only, minimum 8 years working
experience with multi-national companies in Indonesia or minimum 8 years
working experience in Indonesia on projects for multi-national
companies with regular interface with the clients, in supervising a
group of process engineering discipline personnel from various levels
(e.g. senior design engineers, design engineers, designers, drafters,
etc.) with diverse nationalities.
• The candidate shall have
thorough knowledge on the process engineering discipline and broad
knowledge on various aspects, such as: process engineering software
(refer to Attachment A5), internationally recognized engineering codes
& standards, etc.
• The candidate shall have extensive
experience in facilitating and/or supporting HAZOPS and VIPs sessions,
such as: Value Engineering, etc.
• The candidate shall have strong
supervisory capability and high skills for facilitation &
coordination, mentoring & coaching and networking.
2. LEAD DESIGN ENGINEER MECHANICAL AND PIPING
Work Location: Jakarta
Roles and Responsibilities
• Lead and supervise Contractors
activities in development of deliverables in respective engineering
discipline (e.g. piping, mechanical, instrument & control,
electrical, civil & structural) during Contract period.
• Serve
as SME (subject matter expert) in respective engineering discipline
during Contract period, including utilizing Contractors corporate
internal and/or external professional networking as necessary.
•
Implement Contractors QA/QC plan including internal squad check process
for deliverables of the respective engineering discipline, prior to
submission to Company.
• Interface with relevant professional
organizations to get information on “state of the art”
technologies/knowledge on related engineering discipline during
performance of Engineering Services.
• Report to and assist Superintendent Engineering for execution of Off-site Engineering Services during the Contract period.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
•
The candidate shall have minimum 15 years working experience in related
engineering discipline works (including 3D modeling related aspects)
for oil & gas or petrochemical handling projects and/or facilities,
with minimum 10 years of which at senior and lead position. Furthermore,
several years of which shall cover following aspects:
• Minimum
experience as Lead Design Engineer for EPC or ECM or EB contracts for
oil & gas or petrochemical industries in the last 5 years.
•
Minimum 5 years working experience outside of his/her home country, in
supervising a group of related engineering discipline personnel from
various levels (e.g. senior design engineers, design engineers,
designers, drafters, etc.) with diverse nationalities.
o Minimum
experience as Lead Design Engineer for EPC or ECM or EB contracts for
oil & gas or petrochemical industries in the last 5 years.
o
Minimum 5 years working experience outside of his/her home country, in
supervising a group of process engineering discipline personnel from
various levels (e.g. senior design engineers, design engineers, 3D
designers, designers, drafters, etc.) with diverse nationalities.
o
Alternative for Article (b) above for Group III National only, minimum 8
years working experience with multi-national companies in Indonesia or
minimum 8 years working experience in Indonesia on projects for
multi-national companies with regular interface with the clients, in
supervising a group of process engineering discipline personnel from
various levels (e.g. senior design engineers, design engineers,
designers, drafters, etc.) with diverse nationalities.
• The
candidate shall have thorough knowledge on the respective engineering
discipline and broad knowledge on various aspects, such as: related
engineering software (refer to Attachment A5), internationally
recognized engineering codes & standards, etc.
• The candidate
shall have extensive experience in facilitating and/or supporting HAZOPS
and VIPs sessions, such as: Value Engineering, etc.
• The
candidate shall have strong supervisory capability and high skills for
facilitation & coordination, mentoring & coaching and
networking.
• Candidate shall have extensive experience in
providing technical specification & datasheet for procurement
process, both for static or rotating equipment, and proficient with all
associated codes & standards, such as: API610, API676, ASME-VIII
Division 1/2, API650, etc.
• Candidate shall have extensive
experience in implementing 3D modeling for piping design and familiar
with 3D baseline software (PDMS and Naviswork Review).
• The
candidate shall have strong supervisory capability and high skills for
facilitation & coordination, mentoring & coaching and
networking.
3. SENIOR PROCESS ENGINEER
Work Location: Jakarta
Roles and Responsibilities
• Prepare and complete process
engineering design, coordinate Contractors activities in development of
process engineering deliverables.
• Provide technical consultation
for Facility construction and commissioning, if its required to support
Companys related projects
• Work closely with Companys user(s) during review sessions of deliverables
•
Provide mentoring on related process engineering aspects to Contractors
Process Engineers to enhance their competency to provide risk
management (safety and reliability) services to the various
RekindWorleyParsons Safety & Risk Management clients.
• To be
responsible to the performance of projects assigned to both in terms of
technical capability and also commercial performance of the project.
• To promote RekindWorleyParsons Safety & Risk Management to
clients to achieve follow-on work with existing clients and new work
with prospective clients.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
•
The candidate shall have minimum 8 years working experience in process
engineering works for oil & gas or petrochemical handling projects
and/or facilities, with minimum 3 years of which at senior engineer
position.
• Address and co-ordinate safety in Design requirements.
• Perform Inherent Safety Review.
• Knowledge of HAZOP workshops, Fire & Explosion Analysis, Fire Protection related studies and Formal Safety assessments.
• Identify Safety Critical Element & Performance Standards.
• Identify Design Requirements for Safety Systems.
• Perform Risk Assessment Studies including QRA, FERA, ESSA, F&G, Dropped Object,
• Perform Loss Prevention Studies includes Hazardous Area Classification, EERA.
•
Perform fire water system design including fire water demand
calculations and steady-state fire water network hydraulic modelling
• Have a sound understanding of Active and Passive Fire Protection Design
• Estimation of work scopes & CTR.
• The candidate shall have thorough knowledge on process engineering
and be proficient with related baseline software (refer to Attachment
A5) and codes/standards.
• The candidate shall have high mentoring & coaching skills.
4. SENIOR DESIGN ENGINEER PIPING
Work Location: Jakarta
Responsibilites:
• Prepare and complete discipline engineering
design, coordinate Contractors activities in development of related
discipline engineering deliverables
• Provide technical consultation
for Facility construction and commissioning, if its required by Company
to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Requirements:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in
related engineering discipline works for oil & gas or petrochemical
handling projects and/or facilities, with minimum 3 years of which at
senior engineer position.
• The candidate shall have thorough
knowledge on related engineering discipline and be proficient with
related baseline software (refer to Attachment A5) and codes/standards.
• For piping discipline, the candidate shall have sufficient experience
in implementing 3D modeling for piping design and familiar with 3D
baseline software (PDMS and Naviswork Review).
The candidate shall have high mentoring & coaching skills.
5. DESIGN ENGINEER ELECTRICAL
Work Location: Jakarta
Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and
commissioning, if its required by Company to support Companys related
projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in
related engineering discipline works for oil & gas or petrochemical
handling projects and/or facilities.
• The candidate shall have
adequate knowledge on respective engineering discipline and capable to
utilize with related baseline software (refer to Attachment A5) and
codes/standards.
6. DESIGN ENGINEER PIPING (Layout and Material)
Work Location: Jakarta
Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and
commissioning, if its required by Company to support Companys related
projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in
related engineering discipline works for oil & gas or petrochemical
handling projects and/or facilities.
• The candidate shall have
adequate knowledge on respective engineering discipline and capable to
utilize with related baseline software (refer to Attachment A5) and
codes/standards.
7. DESIGN ENGINEER INSTRUMENTATION & CONTROL
Work Location: Jakarta
Roles and Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and
commissioning, if its required by Company to support Companys related
projects.
• Work closely with Companys user(s) during review sessions of deliverables.
Qualification of Personnel
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in
related engineering discipline works for oil & gas or petrochemical
handling projects and/or facilities.
• The candidate shall have
adequate knowledge on respective engineering discipline and capable to
utilize with related baseline software and codes/standards.
8. DOCUMENT CONTROL
Work Location: Jakarta
Roles and Responsibilities
• Establish an efficient document control system and procedures, and ensure proper utilization of such.
• Be responsible to enhance / upgrade the system to keep pace with the changing business environment
• Compile all project correspondences and maintain good project history.
•
Assist Company to compile all projects related documents for hand over
process to Companys asset owner, which shall include but not limited to:
vendor manuals, spare-parts lists, as-built drawings, results of QA/QC
inspection, pre-commissioning & commissioning data, project MOC
documentation, etc.
• Assist Company to provide miscellaneous
technical supports which shall include but not limited to: project data
tracking and compilation, managing project files, field data collection
and verification, managing engineering deliverables review status and
correspondence, etc.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) with 5 years working experience or
senior high school graduate (SMU) with 8 years working experience, both
in document control and/or in providing various technical assistances.
•
The candidate shall be skilled to use Microsoft Office software, such
as: Excel spreadsheet, Microsoft Word, Microsoft Access, etc.
9. DRAFTER PIPING
Work Location: Jakarta
Roles and Responsibilities
• Development of design drawings by
using CADD in accordance with their function and objective as directed
by Contractors Designer.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) or equivalent, with 2 years working
experience or senior high school graduate (SMU) with 4 years working
experience, both in design drafting by using CADD.
• Minimum 1 year
of which (with D3 degree) or 2 years of which (for SMU graduate),
working for oil & gas or petrochemical handling projects and/or
facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
10. DRAFTER CIVIL AND STRUCTURAL
Work Location: Jakarta
Roles and Responsibilities
• Development of design drawings
by using CADD in accordance with their function and objective as
directed by Contractors Designer.
Qualification of Personnel
• Minimum education is to possess
an engineering diploma degree (D3) or equivalent, with 2 years working
experience or senior high school graduate (SMU) with 4 years working
experience, both in design drafting by using CADD.
• Minimum 1 year
of which (with D3 degree) or 2 years of which (for SMU graduate),
working for oil & gas or petrochemical handling projects and/or
facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Microstation version 8i.
All
applications are appreciated and will be treated confidentially. Only
qualified, short-listed applicants will be invited for further process.
If you find that your skill meet the requirement please send your
resume in PDF to lica.rizawaty@rekindworleyparsons.com & ayu.anindita@rekindworleyparsons.com with the title of applied position as email subject. Please dont attach other document besides your own resume
|
|
0 komentar:
Posting Komentar