Qatar Engineering & Construction Company (QCON)
Interview & Test
Qatar Engineering & Construction Company (QCon) is the leading National EPC & Maintenance Contractor in the Oil & Gas, Petrochemical, Fertilizer and Power industries, will conduct Recruitment Test and Interview which will conduct on
1 – 2 JUNE 2014 (choose one date based on your availability)
Time : 09.00 – 15.00
Interview and Test Venue :
BBLKLN CEVEST – Jakarta
Jl. Guntur Raya No.1 Bekasi Selatan
WALK-IN CANDIDATES are welcome to participate,
Read the Job Description below and make sure you are qualified with the requirements
Please bring 3 Sets Resume + Photo + References
Registration will be closed at 10.00 AM on 1-2 June 2014, So come early
1 Mechanical Technician
Positions vacant - 20 Nos.
QR.4,892/- per month + OT
Educational Requirements:
• Fluent knowledge of English language (Speak, Read and Write).
• Certification from High School. Plus three years technical diploma in mechanical engineering.
• Trade training certificate from recognized institution.
Work Experience:
• Minimum work experience seven years as a Mechanical Technician in a Petrochemical, Oil & Gas plant.
• Ability to perform work normally performed by this craft independently.
• Ethylene/Polyethylene plant experience will be an added advantage.
Job Description (but not limited to):
• Ability to read drawings and instructions, to install/remove, overhaul rotating equipment or parts.
• Ability to set, align and install/remove rotating equipment or parts.
• Ability to troubleshoot and analyze equipment problems, and to request required spare parts.
• Ability to overhaul and repair rotating equipment i.e. compressors, blowers, pumps and fans, mixers, mechanical seals etc.
• Carryout day to day plant maintenance work independently.
• Implement mechanical preventive maintenance, follow established procedures and record all results.
• Carry out maintenance jobs on static equipment, valves, pipelines, exchangers, vessels, columns etc.
• Ability to drive forklifts as per Q-Chem regulations is preferred.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training on safety, quality improvement to participate in Q-Chem continuous improvement.
• Understands and apply plant safety standards and maintenance procedures while performing work.
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
5. Reading of drawings and instructions and layout/installation of piping.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
2 Instrument Technician
Positions vacant - 08 Nos.
QR.6,006/- per month + OT
Minimum Qualifications
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate from High School and Graduate of 2-year technical school.
• Trade training Certificates from recognized institutions.
Minimum Work Experience
3 years work experience as an Instrument Technician in a petrochemical, Oil, and Gas plant with experience in maintenance, commissioning, loop testing and start-up activities.
Job Requirements (but not limited to)
• Understand and follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards.
• Understand and follow standard maintenance procedures.
• Understand and follow manufacturers troubleshooting and maintenance procedures.
• Correctly use and care for test and calibration equipment.
• Follow good housekeeping practices.
• Troubleshoot and repair pneumatic, electronic and "smart" instruments.
• Troubleshoot and repair PLCs, and TMR systems (Triconex).
• Calibrate pneumatic, electronic and digital instruments.
• Overhaul control valves and other instruments.
• Read and understand P&ID, Loop, Logic and Electrical drawings.
• Follow ISO procedural requirements for calibration and record keeping.
• Tune feedback control loops.
• Follow plant preventive maintenance procedures.
• Function test safety critical instrument systems following provided written procedures.
• Understand maintenance and calibration requirements for instrument systems such as compressor controls, vibration monitoring, boiler controls, interlock systems, emergency shutdown systems, fire and gas detection systems.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Safe and proper care of tools.
• Work as a team with operations, engineering, and maintenance.
• Take initiative, look for opportunities to improve instrument reliability and reduce maintenance costs.
• Actively participate in company safety and training programs.
• Train Subordinates &co workers. Report on work progress & maintenance activities.
3 Electrical Technician
Positions vacant - 06 Nos.
QR.5,344/- per month + OT
Minimum Qualifications
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate from High School and Graduate of 2-year technical school.
• Trade Certificate from Recognized institutions.
Minimum Work Experience
• Minimum 5 years work experience as an Electrical Technician in a petrochemical, Oil and Gas plant.
• Able to perform work in this type of facility independently.
Job Requirements (but not limited to)
• Follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards.
• Follow standard maintenance procedures.
• Follow manufacturers troubleshooting and maintenance procedures. Correctly use and care for test and calibration equipment.
• Implement good housekeeping practices.
• Use standard instruments to measure voltage, amperage, speed, rotation and vibration.
• Troubleshoot and repair ground faults.
• Repair electrical motors up to 500 HP including replacement of bearings and seals, installation of motor and connection of starters and circuits.
• Maintenance of battery standby systems (UPS) and inverters.
• Read electrical, relay logic and schematic drawings and use these to troubleshoot and repair circuits.
• Installation of conduit, enclosures, wiring, connections and controls up to 480 V for new construction.
• Repair and maintain cathodic protection systems, Overhead cranes, Automatic Overhead Doors and other electrically operated equipment.
• Splice cables up to 500 MCM.
• Read and interpret schematics for power distribution systems up to 33 KV including repair and maintenance of 10 MVA transformers.
• Work at elevated heights.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Carry out established Preventive Maintenance procedures on electrical equipment.
• Write reports, complete forms and mark up drawings and other documentation.
• Safe and proper care of tools.
• Work as a team with operations, technical, and maintenance.
• Improve instrument reliability and reduce maintenance costs.
• Participate in company safety and training programs.
• Train Subordinates &co workers. Report on work progress & maintenance activities.
4 Valve Technician
Positions vacant - 04 Nos.
QR.4,892/- per month + OT
Education requirement:
• Fluent knowledge of English language (Speak, Read and write).
• Graduate certificate from High School.
• Trade training certificate from recognized institution.
• Completion of at least one safety valve manufacturers training course (i.e. Anderson Greenwood, Consolidated, Farris, Crosby etc.) or alternatively a minimum of five years of employment in a Safety Relief Valve Repair Shop.
• Experience certificate from process and Construction Company.
Work Experience
• Minimum five years experience as a valve technician or pipe fitter in a Petrochemical, Oil & Gas plant.
• Mini um of three years of employment in a Safety Relief Valve Repair Shop.
• Experience in various duties involving servicing and setting various types of Pressure Relieving Devices
• Experience in operating and maintaining lapping machine and reading optical flats
• Ability to perform work typical by this craft independently.
Job Description (but not limited to)
• Reading of drawings and instructions and layout/installation of piping.
• Ability to work on static equipment.
• Basic knowledge of rotating equipment, Valves, etc.
• Knowledge of inspection of Pressure relieving devices and spares.
• Good knowledge of hydro testing of pipe spools, vessels and hoses
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
• Ability to work at elevated heights.
• Able to inform supervisor concerning changes in drawings while performing work in order to update the drawings and technical acceptance.
• Have excellent knowledge of piping and related specifications, i.e. schedule, rating etc.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
• Operate all types of hoses and pneumatic tools.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training and toolbox meetings on safety, quality improvement tools to participate in Company continuous improvement.
• Understand and apply the• plant safety standards and maintenance procedures while performing work.
5 Rigger
Positions vacant - 06 Nos.
QR.4,158/- per month + OT
Educational Requirement:
• Fluent knowledge of English language (Speak, Read and Write).
• Qualify according to local regulations or recognized institution.
Work Experience & Certification Requirements
• Minimum five to seven years work experience as a Rigger in a Petrochemical, Oil and Gas Plant.
• Ability to perform work normally performed by this craft independently and in strict compliance with safety requirements.
• Should have a thorough knowledge of rigging standards and specifications.
• Valid Third party certificate for rigging.
Job Description (but not limited to)
• Ability to carry out different types of rigging jobs
• Rigging of loads up to 200 tons.
• Visual inspection of slings shackles spreader bars for serviceability.
• Ability to work at elevated heights
• Carryout minor repairs and Preventive Maintenance and inspection checks daily on rigging accessories, crane etc
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject in-house training on safety, quality improvement tools to participate in Q-Chem‟s continuous improvement.
• Understands and apply plant safety standards and maintenance procedures while performing the work.
6 Equipment Operator / Crane Operator
Positions vacant - 04 Nos.
QR.4,620/- per month + OT
Educational Qualification:
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate certificate from High School.
• Trade training certificate from any recognized institution.
• Be physically and medically fit with regard to eyesight, hearing, reflexes and climbing in and out of various equipments.
Work Experience & Certification Requirements
• Valid Qatari/GCC driving license for Crane, Med Truck, Forklift & Car. (if applicable will be an advantage)
• Valid Third party certificate for Mobile crane operator.
• Valid Third party certificate for Forklift operator.
• Valid Third party certificate for Lorry Loader crane operator.
• Minimum 3rd party training three days for fresh hands in country and two days for the refreshers.
• Minimum five years work experience in a similar capacity from lifting and transporting company in operation of fork lift, trucks, self loader etc.
• Should have worked as a crane operator at least five years with different types crane RT, AT, & TM).
• Should have work experience for different crane capacity staring from 3T up to 90T or higher.
• All crane operators must be certified for each crane they have to operate; All 3rd party certificates provided to crane operators shall indicate the operator‟s proficiency in English and the type, model & capacity of crane the operator has been tested and certified.
• Statement of crane capacity and type shall be clearly marked on the certificate.
Job Description (but not limited to)
• Apply plant safety standards and maintenance procedures while performing the work.
• Drive all types of automobiles and mobile heavy equipment as per Q-Chem regulations.
• Operate heavy equipment delivered by contractor in a safe and efficient manner.
• Should know all signals and rigging standards.
• Equipment operators shall be responsible for ensuring that his equipment is functioning correctly, and properly maintained, and checked against an approved checklist each and every time the equipment is operated.
• Check that the equipment• being used is in good condition and certified for use
• Carry out minor repairs and Preventive maintenance and inspection checks daily on all heavy mobile equipment.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Predict troubles of mobile equipment and advise supervisor equipment failures.
• Will be subject to in-house training on safety, quality improvement tools to participate in Q-Chem continuous improvement.
• Equipment operator shall be able to operate all type of equipments.
7 Warehouse Operator / Forklift Operator
Positions vacant - 10 Nos.
QR.2,795/- per month + OT
Minimum Qualifications
• Minimum 21 years of age
• 1 year experience of warehouse operations including forklift operation.
• Be educated to a minimum secondary level
• Be capable of reading, speaking, writing and understanding the English language sufficient for the fulfillment of their function in a safe manner.
• Physically fit with regard to eyesight, hearing, reflexes and ability to handle lifting gear and equipment
Job Requirements (but not limited to )
• Ability to handle multiple tasks concurrently
• Capable of being trained to opeRate warehouse electronic inventory tracking equipment
• Physically capable of lifting 25kg over head
• Physically capable of climbing ladders, climbing in and out of various vehicles (forklifts, trucks, cranes etc.).
• Physically capable of working outdoors in temperatures approaching 120oF
• Operate forklift to move PE inventory within warehouse. Should posses valid Qatari driving license and third party certificate for fork-lift operation.
• Perform all operations required to bulk load sea containers
• Load PE product onto trucks
• Perform record keeping of inventory movements using bar code and/or pre-designated forms
• Assist with physical inventory and trouble shooting of missing inventory
• Support a working environment of empowerment that takes responsibility for personal quality of work
• Responsible for all aspects of team safety within warehouse work area
• Operate Q-Chem Warehouse operations within the culture, laws and environment of Qatar
• Responsible for warehouse inventory accuracy, proper labeling of packaging and accurate loading of trucks & sea containers per Shipping Team instructions
• Maintain effective team communications
• Perform other duties in addition to regular duties as required
8 Yard Operator / Heavy Driver
Positions vacant - 10 Nos.
QR.2,795/- per month + OT
Minimum Qualifications
• Be at least 25 years of age
• Be educated to a minimum secondary level
• A minimum of five years experience
• Be capable of reading, speaking, writing and understanding the English language sufficient for the safe operation of the crane, equipment
• Be physically and medically fit with regard to eyesight, hearing and reflexes
Job Requirements (but not limited to)
• Physically capable of lifting 25kg over head
• Physically capable of climbing ladders, climbing in and out of various vehicles (forklifts, trucks, cranes etc.)
• Physically capable of working outdoors in temperatures approaching 120oF
• Use dock yard equipment to move full and empty sea containers to and from designated areas safely
• Team member for hydrocarbon and sulfur bulk loading
• Perform record keeping of container movements onto pre-designated forms if required
• Assist with physical inventory and trouble shooting of missing containers
• Perform other duties in addition to regular duties as required
• Support a working environment of empowerment that takes responsibility for personal quality of work
• Operate Q-Chem dock operations within the culture, laws and environment of Qatar
• Responsible for all aspects of team safety within dock work area
• Maintain effective team communications
• Perform other duties in addition to regular duties as required
9 PIPE FITTER
Positions vacant - 10 Nos.
Salary: QR.2000-2400/- per month + OT
Education requirement:
• Fluent knowledge of English language (Speak, Read and write).
• Graduate certificate from High School.
• Trade training certificate from recognized institution (2 years ITI certificate as fitter).
• Experience certificate from process and Construction Company.
Work Experience
• Minimum seven years experience as a pipe fitter in a Petrochemical, Oil & Gas plant.
• Ability to perform work typical by this craft independently.
• Typical plant experience will be an added advantage.
Job Description (but not limited to)
• Reading of drawings and instructions and layout/installation of piping.
• Ability to work on static equipment.
• Basic knowledge of rotating equipment, Valves, etc.
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
• Knowledge of bolting, gaskets etc.
• Ability to work at elevated heights.
• Able to inform supervisor concerning changes in drawings while performing work in order to update the drawings and technical acceptance.
• Have excellent knowledge of piping and related specifications, i.e. schedule, rating etc.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
• Operate all types of hoses and pneumatic tools.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training and toolbox meetings on safety, quality improvement tools to participate in Company continuous improvement.
• Understand and apply the plant safety standards and maintenance procedures while performing work.
• Drive forklift and other mobile equipment as per Q-Chem regulations.
10 PIPE FABRICATOR
Positions vacant - 3 Nos.
Salary: QR.2000-2400/- per month + OT
Educational Requirements:
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate certification from High School.
• Trade training certificate from recognized institution.
Work Experience
• Experience certificate as fabricator from Petrochemical Plant or Construction Company.
• Five to eight years work experience in similar capacity in a process or construction company.
Job Description (but not limited to)
• Understand and apply the plant safety standards and maintenance procedures while performing the work.
• Drive forklift and other mobile equipment as per Q-Chem regulations.
• Ability to operate all types of hand and pneumatic tools.
• Make field sketch get it approved by Q-Chem and fabricate job independently.
• Apply the Company piping class, standards, etc., while performing the work.
• Read isometric and other engineering drawing and carry out job accordingly.
• Ability to make sketch and fabricate miter joints.
• Good knowledge of piping and related specifications, i.e. schedule, rating, etc.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Able to use cutting torch and welding machines for cutting and tack welding job.
• Able to work on plasma cutting machine
• Will be subject to in-house training on safety, quality improvement tools to participate in Q-Chem continuous improvement.
• Ability to work at Elevated heights.
the benefits offered for the above category:
Food : Will be provided by the Company free of cost.
Paid Leave : Eligible for paid leave upon completion of 12 months continuous service @ 30 days per annum.
Leave passage: From candidates nearest Airport to Doha while joining, and Doha-Nearest Airport-Doha, while going on leave.
Accommodation: Will be provided by the Company free of cost.
Transport : To and fro work-place transportation will be provided by the Company free of cost.
As we are looking for highly qualified and experienced candidates, the salary and other benefits proposed is also in line with the caliber we are looking for;
Accordingly, pre-screened full set of CVs may please be forwarded for our evaluation and submission to our client QChem for their final written test and interview.
• Only candidates having Petrochemical/Refinery experience to be considered for short-listing. Candidates with construction experience need not be considered.
• The CVs must be complete in all respect; relevant qualification & experience certificates should be attached to the CVs, for verification and short-listing.
• Candidates must be able to handle English language fluently (speak & write).
• The positions are for INDONESIA NATIONALITY ONLY
Candidates having maintenance experience only needs to be sent for evaluation. Please do not send CVs if only having construction experience.
Sent your resume to recruitment@binamandiri.com / ptbinamandiri@yahoo.com subject QCon-(position)
QCON Recruitment Vendor :
PT. Binamandiri Muliaraharja
Jalan Kartini No.1 Malang - Indonesia 65111
P. +62 (341) 347474 | F. +62 (341) 366566 | Email info@binamandiri.com
Interview & Test
Qatar Engineering & Construction Company (QCon) is the leading National EPC & Maintenance Contractor in the Oil & Gas, Petrochemical, Fertilizer and Power industries, will conduct Recruitment Test and Interview which will conduct on
1 – 2 JUNE 2014 (choose one date based on your availability)
Time : 09.00 – 15.00
Interview and Test Venue :
BBLKLN CEVEST – Jakarta
Jl. Guntur Raya No.1 Bekasi Selatan
WALK-IN CANDIDATES are welcome to participate,
Read the Job Description below and make sure you are qualified with the requirements
Please bring 3 Sets Resume + Photo + References
Registration will be closed at 10.00 AM on 1-2 June 2014, So come early
1 Mechanical Technician
Positions vacant - 20 Nos.
QR.4,892/- per month + OT
Educational Requirements:
• Fluent knowledge of English language (Speak, Read and Write).
• Certification from High School. Plus three years technical diploma in mechanical engineering.
• Trade training certificate from recognized institution.
Work Experience:
• Minimum work experience seven years as a Mechanical Technician in a Petrochemical, Oil & Gas plant.
• Ability to perform work normally performed by this craft independently.
• Ethylene/Polyethylene plant experience will be an added advantage.
Job Description (but not limited to):
• Ability to read drawings and instructions, to install/remove, overhaul rotating equipment or parts.
• Ability to set, align and install/remove rotating equipment or parts.
• Ability to troubleshoot and analyze equipment problems, and to request required spare parts.
• Ability to overhaul and repair rotating equipment i.e. compressors, blowers, pumps and fans, mixers, mechanical seals etc.
• Carryout day to day plant maintenance work independently.
• Implement mechanical preventive maintenance, follow established procedures and record all results.
• Carry out maintenance jobs on static equipment, valves, pipelines, exchangers, vessels, columns etc.
• Ability to drive forklifts as per Q-Chem regulations is preferred.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training on safety, quality improvement to participate in Q-Chem continuous improvement.
• Understands and apply plant safety standards and maintenance procedures while performing work.
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
5. Reading of drawings and instructions and layout/installation of piping.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
2 Instrument Technician
Positions vacant - 08 Nos.
QR.6,006/- per month + OT
Minimum Qualifications
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate from High School and Graduate of 2-year technical school.
• Trade training Certificates from recognized institutions.
Minimum Work Experience
3 years work experience as an Instrument Technician in a petrochemical, Oil, and Gas plant with experience in maintenance, commissioning, loop testing and start-up activities.
Job Requirements (but not limited to)
• Understand and follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards.
• Understand and follow standard maintenance procedures.
• Understand and follow manufacturers troubleshooting and maintenance procedures.
• Correctly use and care for test and calibration equipment.
• Follow good housekeeping practices.
• Troubleshoot and repair pneumatic, electronic and "smart" instruments.
• Troubleshoot and repair PLCs, and TMR systems (Triconex).
• Calibrate pneumatic, electronic and digital instruments.
• Overhaul control valves and other instruments.
• Read and understand P&ID, Loop, Logic and Electrical drawings.
• Follow ISO procedural requirements for calibration and record keeping.
• Tune feedback control loops.
• Follow plant preventive maintenance procedures.
• Function test safety critical instrument systems following provided written procedures.
• Understand maintenance and calibration requirements for instrument systems such as compressor controls, vibration monitoring, boiler controls, interlock systems, emergency shutdown systems, fire and gas detection systems.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Safe and proper care of tools.
• Work as a team with operations, engineering, and maintenance.
• Take initiative, look for opportunities to improve instrument reliability and reduce maintenance costs.
• Actively participate in company safety and training programs.
• Train Subordinates &co workers. Report on work progress & maintenance activities.
3 Electrical Technician
Positions vacant - 06 Nos.
QR.5,344/- per month + OT
Minimum Qualifications
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate from High School and Graduate of 2-year technical school.
• Trade Certificate from Recognized institutions.
Minimum Work Experience
• Minimum 5 years work experience as an Electrical Technician in a petrochemical, Oil and Gas plant.
• Able to perform work in this type of facility independently.
Job Requirements (but not limited to)
• Follow plant safety standards and procedures. Be familiar with typical petrochemical plant safety hazards.
• Follow standard maintenance procedures.
• Follow manufacturers troubleshooting and maintenance procedures. Correctly use and care for test and calibration equipment.
• Implement good housekeeping practices.
• Use standard instruments to measure voltage, amperage, speed, rotation and vibration.
• Troubleshoot and repair ground faults.
• Repair electrical motors up to 500 HP including replacement of bearings and seals, installation of motor and connection of starters and circuits.
• Maintenance of battery standby systems (UPS) and inverters.
• Read electrical, relay logic and schematic drawings and use these to troubleshoot and repair circuits.
• Installation of conduit, enclosures, wiring, connections and controls up to 480 V for new construction.
• Repair and maintain cathodic protection systems, Overhead cranes, Automatic Overhead Doors and other electrically operated equipment.
• Splice cables up to 500 MCM.
• Read and interpret schematics for power distribution systems up to 33 KV including repair and maintenance of 10 MVA transformers.
• Work at elevated heights.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Carry out established Preventive Maintenance procedures on electrical equipment.
• Write reports, complete forms and mark up drawings and other documentation.
• Safe and proper care of tools.
• Work as a team with operations, technical, and maintenance.
• Improve instrument reliability and reduce maintenance costs.
• Participate in company safety and training programs.
• Train Subordinates &co workers. Report on work progress & maintenance activities.
4 Valve Technician
Positions vacant - 04 Nos.
QR.4,892/- per month + OT
Education requirement:
• Fluent knowledge of English language (Speak, Read and write).
• Graduate certificate from High School.
• Trade training certificate from recognized institution.
• Completion of at least one safety valve manufacturers training course (i.e. Anderson Greenwood, Consolidated, Farris, Crosby etc.) or alternatively a minimum of five years of employment in a Safety Relief Valve Repair Shop.
• Experience certificate from process and Construction Company.
Work Experience
• Minimum five years experience as a valve technician or pipe fitter in a Petrochemical, Oil & Gas plant.
• Mini um of three years of employment in a Safety Relief Valve Repair Shop.
• Experience in various duties involving servicing and setting various types of Pressure Relieving Devices
• Experience in operating and maintaining lapping machine and reading optical flats
• Ability to perform work typical by this craft independently.
Job Description (but not limited to)
• Reading of drawings and instructions and layout/installation of piping.
• Ability to work on static equipment.
• Basic knowledge of rotating equipment, Valves, etc.
• Knowledge of inspection of Pressure relieving devices and spares.
• Good knowledge of hydro testing of pipe spools, vessels and hoses
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
• Ability to work at elevated heights.
• Able to inform supervisor concerning changes in drawings while performing work in order to update the drawings and technical acceptance.
• Have excellent knowledge of piping and related specifications, i.e. schedule, rating etc.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
• Operate all types of hoses and pneumatic tools.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training and toolbox meetings on safety, quality improvement tools to participate in Company continuous improvement.
• Understand and apply the• plant safety standards and maintenance procedures while performing work.
5 Rigger
Positions vacant - 06 Nos.
QR.4,158/- per month + OT
Educational Requirement:
• Fluent knowledge of English language (Speak, Read and Write).
• Qualify according to local regulations or recognized institution.
Work Experience & Certification Requirements
• Minimum five to seven years work experience as a Rigger in a Petrochemical, Oil and Gas Plant.
• Ability to perform work normally performed by this craft independently and in strict compliance with safety requirements.
• Should have a thorough knowledge of rigging standards and specifications.
• Valid Third party certificate for rigging.
Job Description (but not limited to)
• Ability to carry out different types of rigging jobs
• Rigging of loads up to 200 tons.
• Visual inspection of slings shackles spreader bars for serviceability.
• Ability to work at elevated heights
• Carryout minor repairs and Preventive Maintenance and inspection checks daily on rigging accessories, crane etc
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject in-house training on safety, quality improvement tools to participate in Q-Chem‟s continuous improvement.
• Understands and apply plant safety standards and maintenance procedures while performing the work.
6 Equipment Operator / Crane Operator
Positions vacant - 04 Nos.
QR.4,620/- per month + OT
Educational Qualification:
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate certificate from High School.
• Trade training certificate from any recognized institution.
• Be physically and medically fit with regard to eyesight, hearing, reflexes and climbing in and out of various equipments.
Work Experience & Certification Requirements
• Valid Qatari/GCC driving license for Crane, Med Truck, Forklift & Car. (if applicable will be an advantage)
• Valid Third party certificate for Mobile crane operator.
• Valid Third party certificate for Forklift operator.
• Valid Third party certificate for Lorry Loader crane operator.
• Minimum 3rd party training three days for fresh hands in country and two days for the refreshers.
• Minimum five years work experience in a similar capacity from lifting and transporting company in operation of fork lift, trucks, self loader etc.
• Should have worked as a crane operator at least five years with different types crane RT, AT, & TM).
• Should have work experience for different crane capacity staring from 3T up to 90T or higher.
• All crane operators must be certified for each crane they have to operate; All 3rd party certificates provided to crane operators shall indicate the operator‟s proficiency in English and the type, model & capacity of crane the operator has been tested and certified.
• Statement of crane capacity and type shall be clearly marked on the certificate.
Job Description (but not limited to)
• Apply plant safety standards and maintenance procedures while performing the work.
• Drive all types of automobiles and mobile heavy equipment as per Q-Chem regulations.
• Operate heavy equipment delivered by contractor in a safe and efficient manner.
• Should know all signals and rigging standards.
• Equipment operators shall be responsible for ensuring that his equipment is functioning correctly, and properly maintained, and checked against an approved checklist each and every time the equipment is operated.
• Check that the equipment• being used is in good condition and certified for use
• Carry out minor repairs and Preventive maintenance and inspection checks daily on all heavy mobile equipment.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Predict troubles of mobile equipment and advise supervisor equipment failures.
• Will be subject to in-house training on safety, quality improvement tools to participate in Q-Chem continuous improvement.
• Equipment operator shall be able to operate all type of equipments.
7 Warehouse Operator / Forklift Operator
Positions vacant - 10 Nos.
QR.2,795/- per month + OT
Minimum Qualifications
• Minimum 21 years of age
• 1 year experience of warehouse operations including forklift operation.
• Be educated to a minimum secondary level
• Be capable of reading, speaking, writing and understanding the English language sufficient for the fulfillment of their function in a safe manner.
• Physically fit with regard to eyesight, hearing, reflexes and ability to handle lifting gear and equipment
Job Requirements (but not limited to )
• Ability to handle multiple tasks concurrently
• Capable of being trained to opeRate warehouse electronic inventory tracking equipment
• Physically capable of lifting 25kg over head
• Physically capable of climbing ladders, climbing in and out of various vehicles (forklifts, trucks, cranes etc.).
• Physically capable of working outdoors in temperatures approaching 120oF
• Operate forklift to move PE inventory within warehouse. Should posses valid Qatari driving license and third party certificate for fork-lift operation.
• Perform all operations required to bulk load sea containers
• Load PE product onto trucks
• Perform record keeping of inventory movements using bar code and/or pre-designated forms
• Assist with physical inventory and trouble shooting of missing inventory
• Support a working environment of empowerment that takes responsibility for personal quality of work
• Responsible for all aspects of team safety within warehouse work area
• Operate Q-Chem Warehouse operations within the culture, laws and environment of Qatar
• Responsible for warehouse inventory accuracy, proper labeling of packaging and accurate loading of trucks & sea containers per Shipping Team instructions
• Maintain effective team communications
• Perform other duties in addition to regular duties as required
8 Yard Operator / Heavy Driver
Positions vacant - 10 Nos.
QR.2,795/- per month + OT
Minimum Qualifications
• Be at least 25 years of age
• Be educated to a minimum secondary level
• A minimum of five years experience
• Be capable of reading, speaking, writing and understanding the English language sufficient for the safe operation of the crane, equipment
• Be physically and medically fit with regard to eyesight, hearing and reflexes
Job Requirements (but not limited to)
• Physically capable of lifting 25kg over head
• Physically capable of climbing ladders, climbing in and out of various vehicles (forklifts, trucks, cranes etc.)
• Physically capable of working outdoors in temperatures approaching 120oF
• Use dock yard equipment to move full and empty sea containers to and from designated areas safely
• Team member for hydrocarbon and sulfur bulk loading
• Perform record keeping of container movements onto pre-designated forms if required
• Assist with physical inventory and trouble shooting of missing containers
• Perform other duties in addition to regular duties as required
• Support a working environment of empowerment that takes responsibility for personal quality of work
• Operate Q-Chem dock operations within the culture, laws and environment of Qatar
• Responsible for all aspects of team safety within dock work area
• Maintain effective team communications
• Perform other duties in addition to regular duties as required
9 PIPE FITTER
Positions vacant - 10 Nos.
Salary: QR.2000-2400/- per month + OT
Education requirement:
• Fluent knowledge of English language (Speak, Read and write).
• Graduate certificate from High School.
• Trade training certificate from recognized institution (2 years ITI certificate as fitter).
• Experience certificate from process and Construction Company.
Work Experience
• Minimum seven years experience as a pipe fitter in a Petrochemical, Oil & Gas plant.
• Ability to perform work typical by this craft independently.
• Typical plant experience will be an added advantage.
Job Description (but not limited to)
• Reading of drawings and instructions and layout/installation of piping.
• Ability to work on static equipment.
• Basic knowledge of rotating equipment, Valves, etc.
• Knowledge of materials commonly used in chemical service:
1. Pipes : Size, schedule and metallurgy
2. Valves : Size, type, trim and metallurgy
3. Gaskets : Size, type, and installation
4. Fittings : Sizes, rating and type
• Knowledge of bolting, gaskets etc.
• Ability to work at elevated heights.
• Able to inform supervisor concerning changes in drawings while performing work in order to update the drawings and technical acceptance.
• Have excellent knowledge of piping and related specifications, i.e. schedule, rating etc.
• Operate workshop mechanical equip i.e. grinding machine, power saw, etc.
• Operate all types of hoses and pneumatic tools.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Will be subject to in-house training and toolbox meetings on safety, quality improvement tools to participate in Company continuous improvement.
• Understand and apply the plant safety standards and maintenance procedures while performing work.
• Drive forklift and other mobile equipment as per Q-Chem regulations.
10 PIPE FABRICATOR
Positions vacant - 3 Nos.
Salary: QR.2000-2400/- per month + OT
Educational Requirements:
• Fluent knowledge of English language (Speak, Read and Write).
• Graduate certification from High School.
• Trade training certificate from recognized institution.
Work Experience
• Experience certificate as fabricator from Petrochemical Plant or Construction Company.
• Five to eight years work experience in similar capacity in a process or construction company.
Job Description (but not limited to)
• Understand and apply the plant safety standards and maintenance procedures while performing the work.
• Drive forklift and other mobile equipment as per Q-Chem regulations.
• Ability to operate all types of hand and pneumatic tools.
• Make field sketch get it approved by Q-Chem and fabricate job independently.
• Apply the Company piping class, standards, etc., while performing the work.
• Read isometric and other engineering drawing and carry out job accordingly.
• Ability to make sketch and fabricate miter joints.
• Good knowledge of piping and related specifications, i.e. schedule, rating, etc.
• In addition to his normal jobs, he should assist and participate in other maintenance activities.
• Able to use cutting torch and welding machines for cutting and tack welding job.
• Able to work on plasma cutting machine
• Will be subject to in-house training on safety, quality improvement tools to participate in Q-Chem continuous improvement.
• Ability to work at Elevated heights.
the benefits offered for the above category:
Food : Will be provided by the Company free of cost.
Paid Leave : Eligible for paid leave upon completion of 12 months continuous service @ 30 days per annum.
Leave passage: From candidates nearest Airport to Doha while joining, and Doha-Nearest Airport-Doha, while going on leave.
Accommodation: Will be provided by the Company free of cost.
Transport : To and fro work-place transportation will be provided by the Company free of cost.
As we are looking for highly qualified and experienced candidates, the salary and other benefits proposed is also in line with the caliber we are looking for;
Accordingly, pre-screened full set of CVs may please be forwarded for our evaluation and submission to our client QChem for their final written test and interview.
• Only candidates having Petrochemical/Refinery experience to be considered for short-listing. Candidates with construction experience need not be considered.
• The CVs must be complete in all respect; relevant qualification & experience certificates should be attached to the CVs, for verification and short-listing.
• Candidates must be able to handle English language fluently (speak & write).
• The positions are for INDONESIA NATIONALITY ONLY
Candidates having maintenance experience only needs to be sent for evaluation. Please do not send CVs if only having construction experience.
Sent your resume to recruitment@binamandiri.com / ptbinamandiri@yahoo.com subject QCon-(position)
QCON Recruitment Vendor :
PT. Binamandiri Muliaraharja
Jalan Kartini No.1 Malang - Indonesia 65111
P. +62 (341) 347474 | F. +62 (341) 366566 | Email info@binamandiri.com
0 komentar:
Posting Komentar