PT. SUPRACO INDONESIA
Jakarta based company with more than 33 years of experience in providing
services to oil and gas industry and Geothermal in Indonesia. We are
seeking for best candidates to fill the vacant position for our projects
1. E&I Construction Tech Foreman – Field Facilities (CP-A334)
RESPONSIBILITY AND DUTIES:
• monitor construction and
fabrication of E&I activities conducted at Contractors /
Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
•
Support Construction Site Manager in monitoring and appraising the
contractors performance for safety, quality, cost, and schedule; ensure
that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
•
Assist PMT in meeting OIMS expectations as required, especially OIMS
Element 2 (Risk Assessment), OIMS Element 3 (Facility Design &
Construction), OIMS Element 9 (Incident Investigation) and OIMS Element
10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
•
Jointly develop E&I inspection check lists or review the check
lists generated by the Contractor for compliance to project requirements
•
Ensure quality processes are followed for instrument calibration at
contractor facilities and / or in the field for permanent project
materials and temporary test instruments / equipments used in E&I
construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
•
Monitor construction of electrical and instrumentation facilities and
ensure they are completed as per approved engineering documentation and
project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
•
Review Contractors field inspection and test reports and ensure that
inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
•
Verify Contractor / Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement project Construction
Surveillance Program.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Minimum ten (10) years experience in inspection of E&I works on
major onshore construction projects out of which at least 3 years
experience senior E&I construction position
• Experienced in
witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance
Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
Placement : Cepu Site
2. E&I Inspector (CP-A335)
RESPONSIBILITY AND DUTIES:
• Oversee E&I related
construction activities (conduit installation, cabling, terminations,
testing, undrground Cable Installation etc…) performed by the Contractor
or sub-contractors in assigned coverage area.
• Read and understand project design drawings and documents in order to obtain specific knowledge of project work scope.
•
Ensure that all E&I related activities are performed safely and in
compliance with project specifications, company standards, and
regulatory requirements.
• Ensure that all required E&I related inspections are performed properly.
• Maintain daily log of activities.
• Facilitate communication of civil related project execution issues the Project Team.
• Communicate with the Contractor and sub-contractors to ensure that
the work is executed in accordance with project specifications, company
standards, and regulatory requirements.
• Identify and assess
deviations to Contract Technical Specifications and regulatory
requirements; ensure that such deviations will be processed according to
project procedures; maintain Deviation Control Log.
• Assist in stewarding E&I queries from the Contractor and sub-contractors as well as technical information requests.
• Keep Project Team informed of E&I progress, deviations, and execution concerns.
• Provide input on contractor performance such as worker capabilities, training, qualifications, and staffing levels.
• Assist the Project Team in obtaining E&I related contract
documents, including those referred to in the job specification.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Broad and extensive knowledge of:
- Industry design standards, specifications, codes, and appropriate safety criteria
- Onshore Construction for Building and Underground Installation
• Bachelor of Science Degree in an engineering
• 10+ years of closely related professional experience, 5+ years inspecting E&I onshore construction works
• Strong organizational, management, and technical judgment skills
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs, Lotus Notes, etc.
• Read, write, and speak fluent English, especially as it applies to technical and business communications
Placement : Cepu Site
3. Welding / Piping Inspector Offshore (CP-A336)
RESPONSIBILITY AND DUTIES:
• Assist reviewing WPS, WQT records and welding inspection related QC documents
•
Witness and oversee daily activities and related inspection activities
in piping, structural, mechanical, and E&I disciplines. This
includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
•
Monitor in-process welding parameters like fit up, purging and purging
level (O2 checking), heat input and maintenance of inter-pass
temperature, passivation activities, flushing, etc.
• Monitor
welder performance continuously, set in motion the corrective actions
when the quality levels / trend is not in acceptable levels
• Monitor
welding consumable handling on site, and conduct daily spot checks in
the field to ensure proper handling of welding consumables. Review
original welding consumable material certificates for compliance to
codes and specifications where required.
• Monitor / surveillance of material traceability in weldments
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
•
Verify Contractor, Subcontractor Quality management systems, plans,
procedures, and processes are in place. Implement Project Construction
Surveillance Program
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Have minimum of 15 years in welding inspection activities working to
international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok
/ NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector
qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
•
Experience in welding and inspection of exotic alloys like Duplex SS /
Super Duplex SS / Inconel 825 is mandatory and highly preferred
•
Knowledge on purging and maintenance of heat input / interpass
temperature required. Familiar with PMI (P-met) / Ferrite checking and
review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
• Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
•
Native tongue in Bahasa Indonesia with proficiency in spoken and
written English language skills for official works preferred. Familiar
with Microsoft Office suite of software programs, Lotus Notes, etc.
• Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
• More than 5 years experience in Piping / Welding for Offshore Pipeline Project
Placement : Onshore / Offshore Cepu Site
4. Civil Inspector – Field Facilities (CP-A337)
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES
•
Minimum fifteen (15) years experience in inspection of Civil QA/QC
activities out of which at least 5 years in client position .
• Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel
• A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions
• S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English
• Knowledge on International standards like ASCI, AWWA etc., and the material testing methods
• Experienced in witnessing the tests at the laboratories
•
Possess experience to conduct regular spot checks / spot audits on the
on going civil activities at site and implement corrective actions as
required
• Experienced in witnessing the fabrication and installation of civil steel structures
• Experienced in inspection of civil road construction works, culverts, fly over / over pass
• Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works
Placement : Cepu Site
5. Coating Inspector Offshore (CP-A339)
RESPONSIBILITY AND DUTIES:
• Verify required coating inspection methods are performed on Offshore pipeline, including DFT, holiday testing, etc.
• Monitor mixing and application of coating by contractor.
• Maintain daily log of activities.
• Oversee application of field joint coating.
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• Extensive training and experience in coatings & coatings inspection, application methods & testing.
• Previous training as a NACE coatings inspector is helpful.
• Knowledge of surface preparation methods & other requirements for obtaining desired performance from coatings.
• Seven (7) years experience in coatings & coatings inspection.
• More than 5 years experience in Offshore Pipeline Construction till Installation Project
• Overseas pipeline experience is helpful.
• Competent in PC skills relative to Microsoft Word, Excel, and e-mail system
Placement : Onshore / Offshore Cepu Site
6. SHE&S Safety Site (CP-A340)
RESPONSIBILITY AND DUTIES:
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
•
Conduct regular safety inspections / assessments on-site and at key
off-site subcontractor locations in accordance with established project
and site safety plans or as requested by site team members
• Identify
and work to eliminate hazards, unsafe conditions, and unsafe acts; work
with company, contractor, and subcontractor management toward achieving
an injury-free work place
• Keep site management apprised of
significant safety issues, safety alerts and plans / progress towards
resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
•
Communicate safety initiatives, achievements, experiences, and issues
from other sites and projects with site team members and contractor /
subcontractor safety advisors / management
• Participate in
investigation and follow-up of incidents / accidents; prepare
notifications / reports for communication of significant incidents to
company project / functional management per project incident reporting
procedures and matrix
• Coach and advise contractor / subcontractor
safety professionals / management in incident investigation
documentation, reporting, and follow-up, including root cause analysis
and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new team members and visitors to site
• Collect and share safety lessons learned with other sites and project and functional management
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
• College level education or equivalent
• 10+ years in Construction Safety-related positions, around 6 years in Onshore
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
Placement : Cepu Site
7. Environmental, Socioeconomic and Regulatory (CP-A341)
REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
•
Broad project management, technical and SH&E skills with good
understanding of working in a project setting and an ability to interact
amicably with various external stakeholders
• 5+ years broad-based
experience preferred, with prior experience in one or more related
disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
• Knowledge of EMDC strategies and key business drivers
•
Good interpersonal and communication skills in English and Bahasa
Indonesia. Ability to speak Jawanese is an additionally desirable
attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
•
Ability to interact proactively in the Projects interest, with EPC
contractor, local Government offices and local community in East Jawa
province.
Placement : Jakarta/Cepu Site
Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.
|
|
|
